Selling surplus

Valuing a pallet of leftover carpet tiles before you list it for sale

To sell surplus carpet tiles for what they are worth, start with three facts you can get from the storeroom in ten minutes: how many square metres you have, what the box labels say, and whether every label carries the same batch code. A well-known range in a neutral colour, sealed and in one batch, is the easiest kind of lot to place. A distinctive corporate colour, mixed batches or a few part boxes all narrow the buyers who can use it — and a part-pallet of around 40 m² is usually better collected than sold.

What makes a lot easy or hard to place

Easier to place

What buyers look for

  • A range buyers recognise, with the product code on every box
  • A neutral colour that suits many floors
  • One batch code across the whole quantity
  • Sealed boxes, stored dry and flat
  • Enough square metres to cover a room
Harder to place

What narrows the market

  • A distinctive corporate or brand colour
  • Several batches, or no labels at all
  • Opened and part boxes mixed in
  • Signs of damp or crushing
  • A quantity too small for most jobs

What drives the price of secondhand tiles

A word on terms first. Tiles that have been laid and lifted are second-hand in the true sense, and they bring old adhesive with them, which the guide to fixing second-hand tiles deals with. A pallet of over-order that has sat in your storeroom since the fit-out finished has never been down, and it is surplus: new tile with a history. If yours is the second kind, the guide to what "boxed and unused" means sets out how a listing describes it.

The reference point a buyer uses is what the same range costs new, and every reason your lot is less useful than a new delivery comes off that figure. The fit-out guide to surplus against new shows that comparison from the buyer's side. Six things decide how much comes off.

Brand and range. Buyers search by manufacturer and range name, often because they are matching an existing floor. A recognised range with a readable label is easy to find and easy to check against its data sheet. A tile nobody can identify has to be sold on looks alone.

Colour demand. A common grey loop from a major brand moves faster than a distinctive corporate colour, because far more floors can take it. A corporate colour still sells, but to a much smaller group: the original company, or someone who happens to want exactly that shade. Expect it to take longer, and be realistic about price.

Batch consistency. One batch code across the whole quantity means a buyer can lay it as one continuous floor. The same quantity in three batches is, to a buyer, three smaller lots.

Sealed boxes. A sealed box tells a buyer the count is right and nothing has been taken out. Opened and part boxes are still saleable, but the buyer has to trust your count, and some will price that in.

Whether the range is still made. A current range competes with the manufacturer's own price for new stock. A discontinued one has fewer buyers, but the ones who need it to repair an existing floor have nowhere else to go.

Where it is, and how easily it gets out. Transport is part of every buyer's sum. Stock on a ground-floor loading bay is worth more to them than the same stock up three flights of stairs in a building with no goods lift.

For a sense of what one listing looks like: as this was written, a lot of 1,980 m² of Milliken Formworks 3.0 in one colourway was listed on our feed at £18.00 per m². That is one lot, not a price guide. Your own will depend on the six points above.

Square metres per pallet — the quick estimate

The quickest way to value leftover carpet tiles is to know exactly how much you have, because every buyer's first question is whether it covers their floor. You can work it out from the labels without opening anything.

From boxes to square metres

  1. Area of one tile. A 500 × 500 mm tile is 0.5 m × 0.5 m = 0.25 m².
  2. Area of one full box = tiles per box × 0.25. The tile count is on the label; if it says 20, a box is 20 × 0.25 = 5 m². Some labels give the square metres directly.
  3. Full boxes = count them, rather than multiplying rows by layers and hoping.
  4. Total = full boxes × m² per box, plus any part boxes counted tile by tile.

Take a typical over-order of 200 m² from boxes of 20 tiles. Each box is 5 m², so 200 ÷ 5 = 40 full boxes. A part-pallet of 40 m² is 40 ÷ 5 = 8 boxes — enough for a small meeting room, which is why it tends to suit a repairs team rather than a fit-out.

Then split the total by batch. If the boxes carry a batch or dye-lot code, note it on each box as you count and add them up separately: "200 m², all batch A" and "200 m²: 120 batch A, 80 batch B" are different listings to a buyer, and the second is worth knowing before you set an expectation. If the boxes are planks or another size, work out the area of one tile the same way and carry on.

The listing

Photos and details that get enquiries

A listing that gets views but no enquiries usually leaves a buyer with one question they cannot answer without phoning you. Six photos, each answering a question, close most of those gaps.

Six photos and the question each one answers
PhotographThe buyer's question
The whole pallet, from a few steps backIs there really as much as the listing says?
One box label, close enough to read the product and batch codeIs this the range I am matching?
Labels from a box at the top, middle and bottomIs it all one batch?
A tile face in daylight, beside a sheet of white paperWhat colour is it really, on my screen?
A tile stood on its edge, showing the backingHas it been damp or crushed?
Where the pallet stands, and the way outCan I get it out of the building?

Alongside the photos, give the details a buyer needs to plan the job: the square metres under each batch code, the product code from the label, the condition, and the postcode area. Then add the access, which listings most often leave out: ground floor or upstairs, a goods lift or stairs, a loading bay or the street, and when someone can collect. A buyer who can see how the pallet leaves the building can decide without a site visit.

Say what you do not know, too. "Batch codes not checked on the bottom row" is more useful to a buyer than silence, and it costs you nothing.

When collection beats delivery

Small lots change the sum. On 40 m² the cost of arranging transport, a pallet and someone's time can be most of what the stock is worth, and few buyers will commit to a delivery for one meeting room. At that size the realistic outcome is collection: a local buyer picking it up, or, if what you really need is the space back, having it taken off your hands.

Measure that against carpet tile over-order disposal, because disposal is not free either. Usable tile sent to landfill or incineration still carries a disposal charge, on top of writing the stock off. If clearing the storeroom is the point, tick the collection box when you list your surplus and say so in the notes.

Larger lots usually justify the transport, and who arranges it is agreed between you and the buyer. Either way, the access details above are what let them price it.

Ready to list? Post your stock on Carpet Unboxed — brand, colourway, quantity and location are all it takes to start. Buying rather than selling? The inspection checklist is the buyer's side of the same questions.

Questions

What listers ask before posting stock.

Do I have to name a price when I list?

No. The listing form asks for the brand, range, colourway, quantity, condition, location and why the stock is surplus, not a price. If you have a figure in mind, put it in the notes so it can be discussed before anything is published.

Is it worth listing stock from a range I cannot identify?

Yes, if the boxes still carry a label, because the product code identifies it even when the range name means nothing to you. Unlabelled loose tiles are much harder to sell, because no buyer can check what they are.

Should I open a box to check the tiles before I list?

Only if you have to, and say so if you do. A sealed box is worth more to a buyer than one that has been opened, so photograph the labels first and open one box rather than several.