Reading a listing
What 'boxed and unused' means on a surplus carpet tile listing — and what it doesn't
Boxed and unused carpet tiles — meaning, on a surplus listing, tiles that are still in their boxes and have never been laid. That is all the phrase promises. It does not tell you the whole pallet is one batch, that it has been stored somewhere dry and flat, that the quantity has been counted, or that the range is still made. Those are the things that decide whether a lot suits your floor, and they are all questions you can put to the lister before you commit.
What the tag promises
- The tiles have never been laid or walked on
- They are in boxes, not loose or bagged
- Boxes that have been opened are listed separately, as boxed, opened
What you still have to ask
- One batch code across every box on the pallet
- A dry, heated store with nothing stacked on top
- A counted quantity rather than an estimate
- A range that is still in production
Over-orders, fit-out spares and end-of-line: three different things
Boxed and unused stock reaches the market by different routes, and where it came from says a good deal about what is likely to be in the boxes. When stock is listed on Carpet Unboxed, the form asks for the reason it is surplus as well as its condition, because surplus carpet tiles condition only makes sense next to where the stock came from.
Manufacturer over-order. So what is manufacturer over-order carpet? It is stock a manufacturer or distributor made or bought beyond what it sold: a production run longer than the orders behind it, a delivery returned because it was specified wrongly, or a batch that no longer matches the current range. It tends to sit in a warehouse on the pallets it left the line on. Of the three, it is the most likely to be sealed and in one batch, simply because nobody has had a reason to open it or mix it.
Fit-out spares. These are the boxes left when a floor is finished: the margin an installer ordered and did not need, or the maintenance stock a client kept back for repairs and then never used. They are often stored where the building has room — a plant room, a basement, the back of a riser cupboard — rather than where carpet ought to be kept. Expect a mix of full and opened boxes. Because they came from the same delivery as the floor, they are likely to match it, which is useful if that is the floor you are repairing.
End-of-line. Stock from a range that has been discontinued. The tiles are the same as they were the day the range was current; what has changed is that no more will be made. That makes end-of-line the only source for anyone matching an existing floor in that range, and it makes the quantity on the pallet final in the strictest sense.
Why none of them is second-hand. Second-hand tile has been laid, walked on and lifted. All three routes above describe tile that was never put down. The difference is not wear, because there is none; it is history — how many times the boxes have been moved, and what they have stood on since the factory.
Before you commit
Questions to ask before you buy a pallet you haven't seen
A listing tag is a summary. These questions get at what the summary leaves out, and a lister who can answer them without hesitating usually knows their stock.
- Which boxes have never been opened, and which have?
- Do all the box labels carry the same batch code? Can you photograph labels from the top, middle and bottom of the pallet?
- Where did this stock come from — a manufacturer, a finished fit-out, or a building's maintenance spares?
- Is the range still in production, or is this the end of the line?
- Where has the pallet stood, and has anything been stacked on top of it?
- If you send a sample, which box will it come from?
The last question matters because a sample is only as good as the box it came out of. Take the difference between what a few tiles can and cannot show you seriously.
What one tile can show
- The colour, pile and backing, in your own light
- Whether that tile lies flat and smells clean
- The product and batch code on its box
What the rest of the pallet is like
- Whether the other boxes carry the same batch code
- How the bottom boxes have fared on the floor they stood on
- Whether the quantity on the listing is all there
Batch codes and why a matching pallet is worth more
Every box label carries a batch code, and colour can shift between batches. That makes a pallet with one code on every label a different thing from a pallet with three, even when the colourway and the total quantity are identical.
The difference shows up in how much continuous floor the lot can cover. Take a pallet of 180 m² and allow 10% for cuts. If it is all one batch, it can lay a single area of up to 180 ÷ 1.10 = 163.6 m². If the same 180 m² is split 120 m² and 60 m² across two batches, the largest single area it can lay without a visible change is 120 ÷ 1.10 = 109.1 m², and the rest has to go in a separate room.
For a buyer covering an open-plan area, the first pallet does a job the second cannot, which is why it is worth more. For a repairs team patching individual rooms, the two may be worth the same. Either way, the number to ask for is not the total but the square metres under each code.
Storage: what damp, sunlight and stacking do to a boxed tile
A box protects a tile from being walked on, not from where it is kept. Three things do most of the damage to stock that is otherwise new, and each leaves its own evidence.
Damp. Cardboard takes up water from whatever it stands on, and it holds it against the tiles inside long after the floor has dried. The risk is highest for stock that has sat directly on a slab, or in a plant room or basement alongside pipes and tanks — places that are dry until the day they are not. Soft, stained or warped cardboard at the base of a pallet is the outside sign; the inspection checklist covers what to look for on the tiles themselves.
Sunlight. A closed box keeps light off the pile, which is part of what makes boxed stock worth more than loose tiles. The effect of light shows up on the outside first: a pallet that has stood by a window or under a rooflight has cardboard bleached on the side that faced it, which is a quick clue to where it was kept. Opened boxes and loose tiles left in the light are a different matter. If any have been, compare a tile from the exposed side with one from the middle of the pallet before you buy.
Stacking. Carpet tile is heavy, and a box loaded from above for months takes on the shape of what was pressing on it. Crushed corners and bowed lids at the bottom of a pallet mean weight has been sitting on those tiles; boxes stored on their sides are the ones most likely to hold tiles that no longer lie flat. Ask whether anything else was stacked on the pallet — other stock, furniture, the building's spare ceiling tiles — because the lister may not think of it as relevant.
For listers: what fair disclosure looks like
None of this asks a lister to have stored stock perfectly. It asks them to say what they know, so a buyer can price the risk rather than discover it. A fair listing uses the condition tag that fits — boxed, opened if any box has been opened, mixed if the lot is a combination — and names the reason the stock is surplus. It gives the square metres under each batch code rather than one total, and says where the pallet has stood. If something is not known, saying so is disclosure too.
Stock described that way moves faster, because the buyer has fewer questions to ask before saying yes. If you are holding surplus, list it on Carpet Unboxed; if you are buying, work through the 10-point inspection checklist once the answers are in.
Looking for stock? See surplus carpet tiles available now, or request a quote and ask any of the questions above.
Questions
What buyers ask about condition.
Does boxed and unused mean the boxes are sealed?
On Carpet Unboxed, boxes that have been opened are listed as boxed, opened rather than boxed, unused, so the tag should mean the boxes have not been opened. A lister who is unsure which boxes have been opened should say so, and it is a fair question to ask before you pay.
Is manufacturer over-order carpet lower quality?
No. It comes off the same production line as the stock that was sold. It became surplus for commercial reasons — the range was discontinued, the run was longer than the orders, or the batch no longer matches current stock — not because anything was wrong with the tile.
How big a sample should I ask for?
A few tiles from more than one box is worth more than a whole box from one place. Ask for one from the top of the pallet and one from the bottom, and, if the labels show more than one batch code, one from each.