Surplus or new
Buying Surplus Carpet Tiles vs New: What the Price Difference Buys
Surplus carpet tiles are commercial tiles that were boxed for one job and never laid, and they are priced to reflect that. The lower price buys stock that exists today, in a fixed quantity, from whatever batches are on the pallet. It does not buy a reorder, a dye lot chosen for your floor or, usually, the original warranty. For a small room, a rental refit or a home office that trade is often a good one. For a large floor that has to match from the first tile to the last, a new order is the safer call.
| Compared | Surplus | New order |
|---|---|---|
| Price | Set per listing and shown per square metre before you enquire | Set by the manufacturer or distributor for the range and quantity |
| Availability | Stock that already exists, at a stated location | Made or supplied to the range's lead time |
| Quantity | Fixed: when the lot is sold, there is no more of it | Ordered to your measured area, with top-ups while the range is current |
| Batch | Whatever batches are on the pallet, one or several | Ask for a single batch for the whole job when you order |
| Warranty | Normally tied to the original purchaser, so remaining cover is a bonus | Issued to you as purchaser, on the manufacturer's terms |
| Condition | Listed as boxed unused, boxed opened, part-used or mixed | Delivered from the manufacturer or distributor |
| Returns | Agreed with the lister before money changes hands | On the supplier's standard terms |
Cost per square metre: surplus vs new
A surplus listing shows its price per square metre before you make contact. As this was written, the Milliken Formworks 3.0 lot on our feed was listed at £18.00 per sqm for 1,980 sqm. We do not publish a "new" price beside it, because there is no single one: what a new order costs depends on the distributor, the quantity and any contract you buy under. The honest comparison is the one you run yourself, with a new quotation for the same product code in the same quantity.
Compare the cost of covering the floor, not the headline rate. Take your area with its cut allowance — the measuring guide shows that sum — and multiply. For 100 m² of floor that needs 110 m² of tile, the surplus line is 110 × £18.00 = £1,980.00 before transport. Put the new quotation for the same 110 m², delivered, beside it.
Then add the costs each route carries that the rate does not show. On the surplus side that is transport from wherever the pallets stand, and any stock you buy beyond your need because the lot cannot be split. That second one matters more than it sounds. If a 1,980 sqm lot at £18.00 had to be bought whole for a 400 m² floor, the spend would be 1,980 × £18.00 = £35,640.00, and the cost per square metre actually laid would be £35,640.00 ÷ 400 = £89.10. Splitting a quantity is often possible, so ask before you decide a lot is too big.
On the new side, the hidden cost is the over-order: boxes bought as a margin and never laid. That is where a great deal of surplus comes from in the first place. Cheap carpet tiles are only cheap if they cover the floor you are laying, in one batch, without a second order you cannot place.
Lead times and minimum order quantities
A new order runs to whatever lead time and minimum quantity the manufacturer or distributor sets for that range, and both are worth asking about on the first call rather than the last. Surplus has no production lead time, because the tiles already exist. The time it takes is the time to confirm the lot, inspect it if the quantity justifies a visit, and arrange collection or delivery from the location on the listing.
That makes surplus useful against a fixed date. A refit that has to finish before a tenant moves in, or before staff come back on a Monday, can be floored from stock that is standing in a warehouse now — on the condition that the quantity and the batches check out, because there is no slack to fix a mistake later.
Minimums cut the other way. A small room ordered new can leave you holding boxes you did not need if the range is sold above a certain quantity. With surplus, the smallest amount you can buy is whatever the holder is willing to split the lot down to.
Batch matching and dye lots
With a new order, you can ask for one batch to cover the whole job. With surplus, the batches are whatever ended up on the pallet. One lot may be a single production run; another may be three, because it was assembled from the leftovers of different deliveries.
So the question changes. With new stock you ask whether the order will be one batch. With surplus you ask how many square metres sit under each batch number, and whether the largest one covers the biggest area you need to look continuous. If it does, the other batches can go into separate rooms. If it does not, the lot is smaller than its headline number for your purposes.
Surplus can win outright on one job: matching an existing floor. If the range has been discontinued, a new order is not available at any price, and a surplus lot of the same range may be the only way to replace damaged tiles without relaying the whole area.
When a shortfall is worth the risk
A lot that is a little short is not automatically a bad buy. A lot 5% short of a 600 m² requirement is 600 × 0.05 = 30 m², or 30 × 4 = 120 tiles. Whether that matters depends on where those 120 tiles would have gone.
It is usually worth the risk when the floor divides into separate rooms, so a second product can go behind a door without anyone seeing the two side by side. The same goes when the missing area is back-of-house — a store room or a plant room — or when the saving on the main area comfortably pays for a complementary range in the rooms that are left.
It is not worth it on one continuous open-plan floor, on a discontinued range with no second lot anywhere, or on a programme with no slack to find another solution once the fitters are on site. In those cases a shortfall is not a saving; it is a problem you have paid to own.
Warranty, condition grades, and returns
Warranty. A listing gives the manufacturer's warranty for the range as specified — the Milliken lot above, for example, is listed with a 2 year commercial wear warranty. But that cover is normally tied to the original purchaser and a compliant installation, so do not price it in as something you are buying. A new order gives you the warranty in your own name. If the warranty is a requirement of your contract or your landlord, that alone can decide it.
Condition. Search for used carpet tiles and you will find two very different things under one word. On this marketplace, "used" usually means surplus: tiles that were never laid and are still in their boxes. That is different from uplifted tiles recovered from a floor that has been walked on. Every listing here is tagged with one of four conditions:
- Boxed, unused — sealed boxes, tiles never laid. The closest thing to a new delivery.
- Boxed, opened — the boxes have been opened, but the tiles have not been laid. Ask whether every box is still full.
- Part-used — some of the original quantity has been used, and the remainder is part boxes as well as full ones. Count carefully.
- Mixed — a combination of the above in one lot. Ask how the quantity splits between them.
Returns. A new order comes with the supplier's standard returns terms. A surplus sale does not have a standard set: we make the introduction, and you agree terms directly with the holder of the stock, or have Welltek broker the deal. Settle the awkward cases in writing before you pay — a short count, stock that does not match the listing, and who pays to move it back. The inspection checklist covers what to look at before you get that far.
The short version
Surplus or new: which to choose.
When the floor fits the lot
- Smaller rooms, where one lot covers the area, the cut allowance and the spares in a single batch
- Rental and landlord refits between tenants, where budget leads and the exact range does not
- Home offices: a 3 × 3.5 m room is 10.5 m², or 10.5 × 4 = 42 tiles, and 47 with 10% added and rounded up
- Matching a discontinued range on a floor that is otherwise sound
- Fixed dates that a new order's lead time would miss
When the floor has to be exact
- One continuous floor larger than the biggest single batch on offer
- A specification that names a current range and colourway, with no substitutes
- Phased work that will need matching stock in a later phase
- A contract or lease that requires the manufacturer's warranty in your name
- Any job where running short would stop the work
Still weighing it up? Request a quote for surplus carpet tiles with your area and the date you need it by, and we will tell you plainly whether a lot fits — or see what is in stock now.
Questions
What buyers ask when comparing the two.
Are surplus carpet tiles new?
As a product, yes. They were manufactured, boxed and delivered for a job and then not laid. What is not new is their history since the factory, which is why every listing states the condition and why inspection is worth the ten minutes.
Why are surplus carpet tiles cheaper than new?
Because the price reflects what surplus cannot offer: a quantity you can top up, a batch chosen for your job, and usually the original warranty. The holder is also paying to store stock they have no use for, so a fair price that moves it is worth more to them than a full one that does not.
Is there a minimum order for surplus?
It depends on whether the holder will split the lot. Splitting a quantity is often possible, so ask for the quantity you need rather than assuming you have to take the whole pallet.